Its molybdenum plate composition is economically pure. Almost all of the substance is made up of molybdenum (more than 99.95 percent). More than three times as dense as ordinary aluminium plates, the material weighs 10.2 grammes per cubic centimetre cubed. Alloyed Sustainable LLP is a significant provider of Molybdenum plate. ASTM B386 is the standard that applies to this material. They can be as thin as 0.09 inches to as thick as 3 inches, depending on the material. The thickness variation is used in many ways. If the width and thickness of the Molybdenum Sheets are varied, the length of the sheets can range from 42 inches to 114 inches in length. Most commonly, the breadth is between 24 and 30 inches.
The ASTM B386 Mu0079 material can include lead, bismuth, tin, cadmium, iron, nickel, aluminium, silicon, magnesium, phosphorus, carbon, oxygen, and nitrogen depending on which Molybdenum1, 2, or 3 class it falls under. The TZM Mo1 Mo2 Molybdenum Sheets do not include any lead, bismuth, tin, or cadmium as part of their composition. The temperature of 2623 degrees Celsius is where molybdenum reaches its liquid state, known as the melting point. In terms of its position in the periodic table, this is one of the highest. This makes it possible for the ASME SB386 Molybdenum Foil and coils to be substituted for tungsten in a variety of applications. Prices for different forms of molybdenum alloy steel strip, plate, coil, and foil can vary widely depending on the degree to which the molybdenum material has been purified.
Standard Specification For Molybdenum Plates :
| Density : | 10.28 g/cm3 |
| Grades : | Pure Moly |
| Thickness : | 0.1 to 50 mm, 5-50 mm, 1 mm to 50 mm , 5-50 mm CUSTOMIZED |